c do not scale from this print .157 ref 4.000 2 max sway (either direction) c1 .258 ref 6.548 90 - 0 +4 .050 - .010 +.000 1.270 - 0.254 0.000 (see note 6) .07874 .005 2.000 0.127 post area (see note 7& 9) c2 c3 c6 -d 2 max toe (either direction) .006 [.15] .059 ref 1.499 (see table 2) "a" .020 0.500 sq. ref. (typ) c5 2 max sway (either direction) .078 1.981 ref [no. of positions x 2.000]+.00/-.25 (no. of positions x .07874)+.000/-.010 ([no. of pos x [2.000] - [2.000]) {(no. of pos x .07874) - .07874}.005 2 max sway (either direction) patent numbers 5713755 / 5961339 90 - 0 + 4 .050 - .010 +.000 1.267 - 0.254 0.000 (see note 6) .190 ref 4.826 c4 -s 2 max toe (either direction) post area (see note 7 & 9) c6 .006 [.15] tmm-1xx-xx-xx-x-sm-xx-x terminal spec -01: use t-1s13-07-x-2 -04: use t-1s13-04-x-2 -05: use t-1s13-21-x-2 -06: use t-1s13-08-x-2 (see note 8) plating specification -g: gold, 30 au / 50ni min on contact , 3au / 50ni min on tail -t: matte tin contact and tail -s: selective, 30 au / 50ni min on contact matte tin tail -l: light selective, 15 au / 50 ni min on contact, matte tin tail -f: flash selective, 3 au / 50 ni min on contact, matte tin tail -h: heavy gold, 30 au / 50ni min on contact, 3 au / 50ni min on tail -sm: selective, 30 au / 50 ni min on contact, matte tin tail -tm: matte tin contact and tail -lm: light selective, 15 au / 50ni min on contact, matte tin tail -fm: flash selective, 3 au / 50 ni min on contact, matte tin tail body specification -s: single (tmm-50-s) -d: double (tmm-50-d) no. of positions per row -02 thru -40 option -p: pick & place pad (available on positions -03 thru -40)(see sheet 2, fig 2) -m: metal pick & place pad (see sheet 2, fig 2)(4 pos. min) (-t & -tm plating with -m option available to existing customers only as of rev bp. do not design in) -a: alignment pin (see sheet 2, fig 3) (5 pos. per row minimum) (not available on single body specification) -tr: tape & reel (available on pos -03 thru 40) (see sheet 3) option -sm: surface mount option polarized specify pos-xx as pos to be omitted fig. 1 notes: 1. represents a critical dimension. 2. max. pin rotation in body: 2 3. pushout force shall be 1 lb min. 4. all dimensions in brackets [ ] to be millimeters. 5. package positions 03-40 in tubes; layer package -02 position. 6. .050 [1.27] dims to be checked at bend radius, not at end of pin 7. pins to be inserted tail side first to avoid scratches on contact 8. shear tails for -05 & -06 lead style. 9. no bandolier marks are allowed in the post area. 10. max. cut flash: .010 [.25] table 2 lead style "a" post "b" (oal) "c" -01 .126 [3.20] .302 [7.67] .100 [2.54] -04 .075 [1.91] .255 [6.48] .100 [2.54] -05 .065 [1.65] .323 [8.20] .080 [2.03] -06 .168 [4.27] .476 [12.09] .100 [2.54] sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 2 .xxx: .005 .xxxx: .0020 2mm terminal strip assembly by: tmm-1xx-xx-xx-x-sm-xx-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing reidinger 05-22-1991 3 1 sheet scale: 4:1 f:\dwg\misc\mktg\tmm-1xx-xx-xx-x-sm-xx-x-mkt.slddrw material bodies: lcp ul 94 vo, color black terminals: phospher bronze 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision bp
ppp-11: .400 [10.2] ref "r" mpp-04: .225 [5.72] ref ppp-28: .315 [8.20] ref 's" .020 .210 5.334 "r"= pad size above "s" =((no of pos x 07874)-"r")/2 -p: pick & place pad .197 ref 5.004 ppp-28 double fig. 2 .200 ref 5.080 single ppp-11 .144 3.658 ref .072 1.829 ref bp -m: pick & place pad double only lmp-04 (see table 2) "c" ref min gold -d (see table 2) "a" .005 [.13] table 2) "b" ref (see -s -s (see note 8) .118 see table 2) "a" .005 [.13] -d .090 2.286 .0430 1.092 ref sm-a8h 2 max toe (either direction) [2.000.08] (no. of pos.-2) x .07874.003 fig. 3 -a: alingment pin (5 pos. per row minimum) pt-1-24-02-17 tmm-1xx-xx-x-x-sm-d-m pt-1-24-01-17 tmm-1xx-xx-x-x-sm-s tmm-1xx-xx-x-x-sm-s-p pt-1-24-02-17 tmm-1xx-xx-x-x-sm-d in-process 1 in-process 2 -05 & -06 lead style only tube view table 1 (see note 5) option pkg tube plug -s, -s-p pt-1-24-01-17 tp-24 -d, -d-a, -d-m, -d- a-m, -d-p, d-a-p pt-1-24-02-17 tp-09 sheet of 2mm terminal strip assembly by: tmm-1xx-xx-xx-x-sm-xx-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing reidinger 05-22-1991 3 2 sheet scale: 4:1 revision bp f:\dwg\misc\mktg\tmm-1xx-xx-xx-x-sm-xx-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
"a" "a" round holes oblong holes user direction of unreeling tape and reel view sheet of 2mm terminal strip assembly by: tmm-1xx-xx-xx-x-sm-xx-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing reidinger 05-22-1991 3 3 sheet scale: 1:1 revision bp f:\dwg\misc\mktg\tmm-1xx-xx-xx-x-sm-xx-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
